Say Goodbye to Sore Backs, Bulky Gear, and the Effort of Inflating a Camping Mattress with CapixMat

Waking Up Stiff and Sore After a Night on the Ground Despite Using a Sleeping Pad?

Most camping sleeping pads compromise somewhere — foam pads are thin and uncomfortable, lightweight air pads offer minimal insulation, and thicker mattresses are too heavy to carry for any distance. CapixMat is built around a 10cm inflation depth, which provides enough cushioning to isolate pressure points and buffer against rocky, uneven, or frozen ground regardless of terrain. The strip-shape internal connection distributes body weight evenly across the full sleeping surface, preventing the sagging and bottoming-out that thin pads allow under sustained load. Campers who have used it in 35°F conditions report staying warm all night — the air column at 10cm creates a thermal barrier that thinner alternatives simply cannot match.

Tired of Spending Energy Blowing Up a Mattress After a Long Day on the Trail?

Manual inflation takes effort and time precisely when you have neither — after a full day of hiking, the last thing you need is to spend several minutes getting lightheaded blowing up a sleeping pad. CapixMat uses a built-in foot-activated pump that inflates the pad to full firmness in approximately 45–60 seconds. No batteries, no external pump to carry, no lung power required — just step repeatedly on the integrated pump until you reach your preferred firmness, then adjust through the dual-layer air valve as needed.

Struggling to Balance Comfort and Pack Weight on Multi-Day Trips?

At 1.0kg (2.2 lbs) and packing down to 11.4 × 6 inches, CapixMat fits in a backpack side pocket and leaves room for everything else. Thru-hikers who have used it over multi-week trails report noticeably better back comfort compared to foam pads — without the weight penalty typically associated with padded sleeping surfaces. The 40D nylon TPU triple-layer construction keeps the weight low while providing waterproof, tear-resistant, and antibacterial protection across all terrain types.

Sleep as Well Outdoors as You Do at Home — Without the Extra Gear

CapixMat expands to 195 × 70cm — a full-length sleeping surface — with a 16cm integrated pillow built into one end that supports natural cervical alignment and eliminates the need to carry a separate camping pillow. A mother-and-child button system on both sides allows multiple pads to be connected for couples or family camping, each maintaining independent inflation control. Available in Chocolate, Green, and Black, backed by a 90-day money-back guarantee.

• Built-In Foot Pump — Full Inflation in ~60 Seconds, No Accessories Needed
• 10cm Thickness for Ground Insulation and Pressure Point Relief
• 1.0kg / 2.2 lbs — Packs to 11.4 × 6 Inches
• 16cm Integrated Pillow + Mother-and-Child Splicing System

Built-In Foot Pump Inflation System The foot-activated pump is integrated directly into the pad body — no separate attachment point, no external accessory to lose or forget. Stepping on the pump repeatedly draws air in and pressurises the mattress in around 60 seconds. The dual-layer air valve allows fine-tuning of firmness after the initial inflation and provides a reliable airtight seal for the duration of use. Deflation is equally straightforward: open the valve fully, press the air out, fold lengthwise twice, and roll from the pillow end toward the valve to compress completely.

10cm Thickness with Strip-Shape Internal Construction At 10cm of depth, CapixMat provides a cushioning layer thick enough to prevent hard ground contact regardless of body weight distribution. The internal strip-shape connection design stabilises the air chambers and distributes pressure evenly across the surface, maintaining consistent firmness even as you shift position during the night. This construction also significantly reduces the crinkling noise common in basic air mattresses, keeping movement quiet throughout the night.

40D Nylon TPU Triple-Layer Construction The outer fabric combines 40D nylon with TPU lamination across three layers, delivering waterproofing against ground moisture and morning dew, tear resistance against rocky and abrasive surfaces, and antibacterial properties for long-term hygiene. The material is soft against skin where it makes contact while maintaining the structural integrity needed to support up to 300 lbs across all terrain types. Standard TPU patch kits can repair any puncture, restoring full function in the field.

16cm Integrated Pillow and Splicing System The pillow is built into the pad's air chamber and inflates simultaneously with the main sleeping surface, reaching 16cm of height — enough to support most sleeping positions without requiring a separate neck pillow. The mother-and-child button connectors on both long sides allow two or more pads to be joined side by side, creating a wider combined sleeping surface for couples or family groups while each pad retains its independent inflation.

Affordable Excellence A built-in foot pump, 10cm insulating thickness, 40D nylon TPU triple-layer construction, 16cm integrated pillow, 1.0kg pack weight, and a splicing system for multi-pad connection — CapixMat delivers the full range of features needed for comfortable outdoor sleep, backed by a 90-day money-back guarantee.

Frequently Asked Questions

How quickly does the foot pump inflate the CapixMat? Full inflation takes approximately 45–60 seconds of stepping on the built-in foot pump — no lung power, batteries, or external accessories required.

What is the packed size and weight? CapixMat weighs 1.0kg (2.2 lbs) and compresses to 11.4 × 6 inches, fitting comfortably in a backpack side pocket.

What are the fully inflated dimensions? The pad expands to 195 × 70cm with a 10cm inflation depth, plus a 16cm integrated pillow at one end.

Can it be used in cold weather or on frozen ground? Yes — the 10cm air column provides effective thermal insulation against cold ground. For extreme conditions below -7°C (20°F), an additional foam underlay is recommended.

Can multiple CapixMat pads be joined together? Yes — the mother-and-child button system on both sides allows any number of pads to be connected side by side, with each pad maintaining its own independent inflation control.

What is the maximum supported user weight? The 40D nylon TPU construction and strip-shape internal design support users up to 300 lbs when the pad is properly inflated.

Can the pad be repaired if punctured? Yes — standard TPU patch kits available at outdoor retailers will repair punctures effectively; the TPU material accepts patches well and restores full airtightness when applied correctly.

What colours is CapixMat available in? CapixMat is available in Chocolate, Green, and Black.